XTR 230 Boom-type Tunneling Boring Machine has advanced configuration, good stability, safe and reliable. Using high power pump motor and the well-known international brand of hydraulic components to ensure the reliability of hydraulic system. The machine use of the automatic centralized lubrication and adjustable suspension seat to highlight the humanization design.
Eectrical control system
Electrical control system can control the start and stop of every electromotor. It provides control signal and has the function of low voltage creepage protection. It also has the function of oil level and temperature detection, electromotor protection, showing the running state and failure message of electromotor.
The hydraulic system has the function of constant power, pressure cut off and load sensing. The system adopts bypass-valve technology to increase service life of components. Key components of hydraulic system are international famous brands.
Adopting 3-ring water dust suppression containing inner and external spray so that it's effective to cool and suppress
Cutting section constitutes by cutting head, cutting arm, cutting reducer, electromotor box and cutting electromotor. Optimal design by simulation technology is used in cutting head which shape is cone with small diameter. The pick comes from Kennan matt USA. Reasonable arrangement brings powerful tunneling ability.
Twin sticks follow-up rollers make the front chute and back chute connect smoothly. Hydraulic motor drive chain wheel directly to transport materials. Tightener adopt cylinder to adjust the tightness of scraper chain.
Large displacement motor and walking reducer are imported with high torque and strong grade ability .Walking mode adopts rollers-rolling to improve walking ability.
|Weight(with the second conveyor)||t||80|
|Height||Highest Point for Cutting Head||mm||2345|
|Orientation Cutting crosssection||Height||mm||4800|
|Height of gantry||mm||400|
|Max and economic cutting hardness||MPa||≤100/80|
|Total Installed Power||kW||417|
|Max Cutting Power||kW||230/150|
|Power of Pump Station Motor||kW||132|
|Frequency of power supply||Hz||50|
|Rotating Speed of Cutting Head||r/min||54/27|
|Tension Type||MPa||Hydraulic Cylinder Tension|
|Spray Water Pressure||MPa||External≥2.5|